Machining Center
Horizontal machining center
數控(kong)臥式加(jia)工中心
CNC Horizontal Machining Center
數控臥(wo)式(shi)加(jia)工中心規(gui)格(ge)
CNC Horizontal Machining Center Specifications
Main technical parameters |
FWH-L800 |
Work table size(mm) |
The rectangular base station (1200X900)+ Indexing turntable (800X800) |
X Axis Trip (mm) |
1400 |
X Shaft motor power (kw) |
4.5 |
Y Axis Trip (mm) |
1100 |
Y Shaft motor power (kw) |
4.5 |
Z Axis Trip (mm) |
1100 |
Z Shaft motor power (kw) |
4.5 |
B Shaft motor power(kw) |
3.5 |
Four axis B Axis turning diameter (mm) |
Φ1000 |
Maximum workpiece size (mm) |
Φ1300X1500 |
Workbench Bearing (kg) |
2000 |
Fast feed speed m/min |
X、Y、Z:24 |
Cutting feed rate m/min |
1-24000 |
Axial thrust kgf |
1000 |
Machine tool layout |
T |
Taper of spindle |
BT50 |
Spindle speed rpm |
8000 |
Spindle power (kw) |
22-26 |
Spindle torque (N.m) |
140 |
The spindle front bearing (mm) |
100 |
Spindle center to table distance (mm) |
80-1180 |
Spindle end to work center distance (mm) |
250~1350 |
Workbench The distance to the ground (mm) |
1350 |
ATC Capacity |
24 |
Maximum tool diameter (mm) |
Φ112/Φ200( The adjacent Daotao air knife ) |
Change knife time (s) |
3.8 |
Linear positioning accuracy (mm) |
0.012(全程) |
Repeat positioning accuracy (mm) |
0.0072 |
B Axis positioning accuracy Seconds |
±3 |
B Axial repeat positioning accuracy Seconds |
±1 |
High flow and high pressure cooling system Set |
1 |
Machine tool dimension (Long X High X Wide)mm |
4720X5290X4040 |
The total weight of machine T |
26 |
Numerical control system |
Mitsubishi / SIEMENS / FANUC |
數控臥式加(jia)工(gong)中心(xin)特點
The Characteristics Of CNC Horizontal Machining Center
1.The machine tool is T type layout, the change of the workpiece weight will not affect the X, Y axis of the movement inertia, so the contour milling accuracy is not affected by the change in the weight of the workpiece, processing precision.
2.Before and after bed are oil-water separation design. Lubricating oil can be recovered, saving resources, the cooling liquid will not be polluted, cooling effect is good, favorable environmental protection.
3.Indexing table for up to 2000kg, and the indexing accuracy of + 3 ", repeated indexing accuracy of + 1". Can be boring and machining. Also processing all kinds of box, two or three-dimensional surface, all kinds of mold (especially large groove) and other parts.
4.Column for the overall frame structure, good rigidity, thermal deformation is small.
5.The main shaft box is a whole symmetrical box structure, good rigidity, good heat balance effect, small thermal deformation.
6.Spindle system adopts hydraulic floating unclamping structure. When unclamping unclamping force will not impact the spindle bearing, spindle bearing get effective protection.
7.The main shaft bearing is provided with an air curtain protection mechanism, which effectively prevents the cutting and cutting fluid into the main shaft bearing.
8.The main shaft end is provided with 6 nozzles cooling cutting tool and cutting area, the workpiece temperature is small, and the machining precision is high.
9.The main shaft bearing is equipped with forced circulation cooling device, the spindle temperature rise is small, the thermal deformation is small, and the machining precision is high.
10.The main shaft box adopts hydraulic balance its weight, the main shaft box movement is flexible, stable, inertia is small, fast response.
11.Cam type tool changing manipulator, accurate, reliable, fast (knife tool tool change time is only 3.8 seconds).
12.Fully enclosed machine tool shield, operating safety, environmental protection.
13.Fully enclosed machine tool shield, operating safety, environmental protection.
14.Cooling system with three pumps water supply, respectively for the cutter, the cutting zone, workpiece spray cooling and bed flume chip, small thermal deformation of the workpiece, workpiece cleaning degree is high. And the machine tool thermal deformation small, the accuracy of the machine is stable.
15.Japanese MITSUBISHI M70 CNC system, its central processor is the 64 bit processor, fast computing speed, high efficiency, low failure rate, high reliability.
16.This machine tool is suitable for machine tool manufacturing, automobile manufacturing, aerospace, military industry, shipbuilding and die manufacturing industry.